Ducati DesertX Forum banner

Engine bars sump guard

784 Views 5 Replies 2 Participants Last post by  bailey562003
Having just fitted the sump guard is there a spacer or something that goes in between where the bars attach?
hope this makes sense

Attachments

See less See more
1 - 6 of 6 Posts
No spacer. Just the rubber pad.
Thanks. It didn’t come with the bars or guard. It’s it hard plastic or rubber
Would it be possible to make one out of an old inner tube till I get the proper one
Thanks. It didn’t come with the bars or guard. It’s it hard plastic or rubber
Would it be possible to make one out of an old inner tube till I get the proper one
2
I know there’s a spacer that you put on the sump guard bracket that bolts to the the engine. But is the anything that goes between these two parts where they meet ?
Gesture Art Elbow Font Knee

Attachments

See less See more
#14 is a rubber spacer type. #15 bolts to a new bolt that you install with the crash bars. The rubber piece is fitted into the bracket and then the #13 bolt goes through the rubber piece and threads into the bolt, #15. The bracket does move around slightly but it seems to work.
And I think you mean water pump bracket? Not sump? Most hardware stores here in the US, you can buy thick hard rubber stock and make one if need be. Glue it onto the plate where it should mount.
1 - 6 of 6 Posts
Top