[Nomad]

 

[zDesertX]

Welcome to the forum!

What aux lights do you have?

 

[Nomad]

Welcome to the forum!

What aux lights do you have?

Thanks

BAJA Design Squadron Pro

 

[tuftywhite]

I've got some similar lights ready to go on mine. I'm grateful for your picture as it gives me an idea of how to mount them on the bike.

And you being in the UAE, your bike has a greater chance than mine of actually seeing a desert. 😀

 

[Nomad]

I've got some similar lights ready to go on mine. I'm grateful for your picture as it gives me an idea of how to mount them on the bike.

And you being in the UAE, your bike has a greater chance than mine of actually seeing a desert. 😀

You are welcome brother

I’ve used “DENALI Driving Light Mount - Articulating Bar Clamp 21mm-29mm” because the original light mounts were not giving me the 100% confidence that they’ll hold and not crack from vibrations during off-road riding. So these ones are good to go in my opinion.

As for the wiring, BAJA Design Squadron Pro’s come with a relay. 2 wires you connect to the battery (+&- , the main wires) and the other 2 you need to wire the auxiliary light power wire straight into the relay wires (I had to cut those wires and connect them (solder) to it from right and left side, they are under the fairings, so if you have crashbars you have to strip the bike down and you need to remove the tank as well for a clean job, to mount those wires in place, so they are not dangling somewhere else).

When the fog light button is pressed for more than 2 seconds, it will power those wires (the dealer has to enable that feature).